Product Reviews

SmallRig Camera Baseplate 1674 Review: A Simple Foundation for Rod-Based Rigs

A lightweight baseplate for camera owners building a 15mm LWS rig or switching between tripod, shoulder, and other shooting setups.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Camera Baseplate review comes down to a practical question: do you need a compact foundation for 15mm LWS accessories and more flexible rig changes?

Model 1674 combines a dual rod clamp with threaded mounting points in a simple plate designed for compatible cameras and cages.

SmallRig Baseplate Review Summary

The quick verdict

SmallRig Camera Baseplate 1674
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Camera Baseplate 1674

A lightweight baseplate for camera owners building a 15mm LWS rig or switching between tripod, shoulder, and other shooting setups.

  • Dual 15mm rod clamp with 60mm spacing for compatible follow focus systems, matte boxes, lens supports, and other accessories.
  • Bottom 1/4-inch-20 and 3/8-inch-16 threads for attaching a quick release plate or tripod.
  • Can mount directly to a camera or compatible cage using the included 1/4-inch and 3/8-inch fixing screws.
  • Rubber padding on the top surface is intended to help prevent twisting and scratching where the plate meets the camera or cage.

Pros

  • Combines camera or cage attachment with a standard 15mm LWS rod setup in one compact plate.
  • Offers both 1/4-inch-20 and 3/8-inch-16 mounting threads on the bottom for tripod or quick release plate integration.

Consider before buying

  • The rods, shoulder pad, tripod, and other accessories needed for a complete rig are not included.
  • Compatibility depends on the camera or cage’s mounting points and the clearance around nearby controls and accessories; verify your particular configuration.
Read the full review summary

The 1674’s appeal is its role as a bridge between a camera or cage and a broader rig.

Its 15mm rod openings, spaced 60mm apart, provide mounting points for a follow focus, matte box, lens support, or other compatible accessories.

The plate is described as lightweight and contoured to fit with shoulder pads, which makes it a useful building block for a rig that may move between supported and shoulder-mounted setups.

It can attach directly to a camera or cage using the included 1/4-inch and 3/8-inch screws, while bottom 1/4-inch-20 and 3/8-inch-16 threads allow attachment to a quick release plate or tripod.

Compatibility is described broadly, with examples including several Sony, Panasonic, Canon, and Blackmagic models. Since camera cages, mounting points, and accessory clearances vary, check your exact body or cage and intended rig layout before buying.

The buying factors

SmallRig Baseplate Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

15mm LWS accessory support

The dual 15mm rod holes, spaced 60mm apart, support a useful range of common rig accessories.

8/10

Mounting flexibility

Top screws support camera or cage attachment, and bottom threads can connect to a quick release plate or tripod.

8/10

Rig transition potential

The baseplate is intended to help switch between tripod, shoulder, and other shooting modes.

7/10

Camera and cage compatibility

The description gives several camera examples and says it suits most cameras or cages, but fit still depends on the exact setup.

8/10

Portability

Its lightweight, compact form is suited to rigs where a large support plate would be unnecessary.

7/10

Setup essentials

The package includes two fixing screws, two additional 1/4-inch-20 screws, and a hex spanner; the tripod and accessories are separate.

Key Features and Specifications of SmallRig Baseplate

  • Dual 15mm rod clamp with 60mm spacing for compatible follow focus systems, matte boxes, lens supports, and other accessories.
  • Bottom 1/4-inch-20 and 3/8-inch-16 threads for attaching a quick release plate or tripod.
  • Can mount directly to a camera or compatible cage using the included 1/4-inch and 3/8-inch fixing screws.
  • Rubber padding on the top surface is intended to help prevent twisting and scratching where the plate meets the camera or cage.
  • Contoured design intended to fit with shoulder pads, while keeping the plate lightweight.
  • Aluminum construction and a compact footprint of approximately 3.15 by 1.69 by 1.02 inches.
  • Package includes the baseplate, one 1/4-inch fixing screw, one 3/8-inch fixing screw, two 1/4-inch-20 screws, and a hex spanner.

Pros and Cons of SmallRig Baseplate

Pros

  • Combines camera or cage attachment with a standard 15mm LWS rod setup in one compact plate.
  • Offers both 1/4-inch-20 and 3/8-inch-16 mounting threads on the bottom for tripod or quick release plate integration.
  • Can be used as part of a rig intended to move between tripod, shoulder, and other shooting modes.
  • Includes multiple screws and a hex spanner for mounting the plate and compatible accessories.

Consider before buying

  • The rods, shoulder pad, tripod, and other accessories needed for a complete rig are not included.
  • Compatibility depends on the camera or cage’s mounting points and the clearance around nearby controls and accessories; verify your particular configuration.
  • The plate is a mounting foundation rather than a complete support or stabilization system, so buyers seeking an all-in-one rig will need additional components.

Who Should Buy SmallRig Baseplate?

Good fit

Consider the SmallRig Camera Baseplate if you already use, or plan to build, a 15mm LWS setup and want a small plate to connect that system to a camera or cage.

The rod spacing gives you a defined place to add compatible accessories, while the bottom threads help integrate the plate into a tripod or quick release arrangement.

It also suits shooters who value the option to reconfigure a rig for tripod and shoulder use.

Before ordering, compare the plate’s screw positions with your camera or cage, confirm that your chosen quick release plate uses a compatible connection, and check how rods and accessories will sit relative to the lens and other controls.

Who should skip it

Skip this plate if you need a complete shoulder rig, tripod, rod set, or stabilizer in one purchase. Those components are separate, and this product’s job is to provide a mounting base.

It may also be a poor fit if your camera or cage lacks a suitable mounting point or your planned accessories require a different rod standard. Confirm the full setup before committing.

How the SmallRig Baseplate Fits Into a Camera Rig

Rod support and accessory planning

The 15mm diameter holes and 60mm spacing make the plate useful as a foundation for compatible LWS accessories.

Think through which components you want to mount and where they need to sit; the baseplate supplies the rod interface, while the rods and accessories are separate purchases.

Mounting to a camera, cage, or tripod

The included 1/4-inch and 3/8-inch fixing screws give options for securing the plate to a camera or cage, and the bottom threads support attachment to a quick release plate or tripod.

Check screw alignment and the intended connection on each part of your rig before assembly, especially if you plan to leave other cage accessories in place.

Moving between shooting configurations

SmallRig describes the plate as helping a camera switch between tripod, shoulder, and other shooting modes.

Its contoured shape is intended to work with shoulder pads, but a complete shoulder configuration still depends on your pad, rods, and the rest of the support system.

Protection and handling

Rubber padding on the top is intended to reduce twisting and scratching at the camera or cage contact surface.

The aluminum plate is compact and lightweight, qualities that may appeal to mobile rigs; the description does not establish how a particular assembled setup will balance, so consider the weight and position of your own accessories.

Alternatives to SmallRig Baseplate

One supplied option offers a distinct cage-based approach for a specific Sony camera family. No second candidate provides a close, clearly comparable baseplate alternative.

Video Camera Supports & Stabilizers alternative

SmallRig HawkLock Quick Release Cage for Sony Alpha 7 Series
4.7/5

700+ ratings

Read Amazon Reviews

SmallRig HawkLock Quick Release Cage for Sony Alpha 7 Series

Choose the baseplate if you need a general rod-support foundation for a compatible camera or cage.

Consider the cage if you own one of its listed Sony models and want a camera-specific enclosure with integrated accessory mounts and an Arca-compatible bottom plate.

  • This cage is designed for specified Sony Alpha 7 models and includes an Arca-compatible bottom quick release plate, multiple mounting points, a cold shoe, and a HawkLock NATO rail.
  • The 1674 is a compact baseplate with 15mm LWS rod holes and bottom tripod threads, intended to work with compatible cameras or cages.

Is SmallRig Baseplate Worth It?

The SmallRig Camera Baseplate 1674 is worth considering for a compact rig built around 15mm LWS rods.

Its useful combination of camera or cage attachment, rod support, and bottom tripod threads makes it a practical foundation for shooters who already know which accessories they want to add.

Check your camera or cage mounting points and the rest of your rig before buying, and account for the rods, shoulder pad, tripod, and accessories that are sold separately.

If your setup needs a complete support system, this plate alone will not provide it.

Your review at a glance

SmallRig Camera Baseplate 1674
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Camera Baseplate 1674

A lightweight baseplate for camera owners building a 15mm LWS rig or switching between tripod, shoulder, and other shooting setups.

  • Dual 15mm rod clamp with 60mm spacing for compatible follow focus systems, matte boxes, lens supports, and other accessories.
  • Bottom 1/4-inch-20 and 3/8-inch-16 threads for attaching a quick release plate or tripod.
  • Can mount directly to a camera or compatible cage using the included 1/4-inch and 3/8-inch fixing screws.
  • Rubber padding on the top surface is intended to help prevent twisting and scratching where the plate meets the camera or cage.

Written by

creativeindustrialobjects.com Editorial Team

Editorial team

creativeindustrialobjects.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Camera Baseplate 1674

SmallRig Camera Baseplate 1674

A lightweight baseplate for camera owners building a 15mm LWS rig or switching between tripod, shoulder, and other shooting setups.

  • Dual 15mm rod clamp with 60mm spacing for compatible follow focus systems, matte boxes, lens supports, and other accessories.
  • Bottom 1/4-inch-20 and 3/8-inch-16 threads for attaching a quick release plate or tripod.
Check Video Reviews on Amazon